Why it matters
Gravity and lateral forces reach the ground through connected building elements. A wall that looks like a partition may carry load or provide bracing. A visual sketch helps ask informed questions but cannot establish which elements can be removed.
What you’ll need
Tools
- Notebook
- Phone camera
- Available building drawings
Materials
- Simple floor-plan sketch
- Maintenance and alteration history
Before you begin
Safety & limits
- Observe only safely accessible areas. Do not remove finishes, cut framing, drill beams, jack floors, enter unsafe crawlspaces or test movement. Sudden sagging, collapse sounds or visibly unstable components require leaving the area and seeking emergency help. Structural alteration requires qualified local design and approvals.
Work carefully, in order
The method
- 01
Gather the building history
Collect available plans, permits and records of additions, removed walls, water damage or repairs. Note which documents describe the present house and which show an older arrangement. Ask the owner about changes rather than assuming an attractive finished surface means the underlying work was assessed.
- 02
Sketch accessible spaces
Draw the main rooms and approximate positions of visible walls, stairs and openings without opening finishes. Mark areas you cannot safely see. Label observations separately from guesses. Do not use the sketch to declare a wall non-bearing or to select demolition locations.
- 03
Follow an apparent gravity path
On the sketch, trace a possible route from roof to walls or beams, then to supports, foundations and ground. Compare levels where visible. Note missing information at concealed connections. The exercise explains a relationship; it does not establish sizes, capacities or continuity in the actual house.
- 04
Consider sideways forces
Record visible bracing or structural panels only if safely exposed already. Wind and earthquake forces need connections and restraint as well as vertical support. A large new doorway or removed panel can change these relationships even if the ceiling appears unchanged. Leave the design judgement to a qualified professional.
- 05
Document concerns without testing
Photograph accessible cracks, staining, sloping surfaces or separation with a date and location. Note whether a change is new or worsening, but do not probe rot or push a wall to test it. Leave a suddenly changing or unstable area and seek urgent assistance rather than continuing the survey.
- 06
Prepare an assessment brief
Give the history, sketch, observations and intended alteration to a qualified structural professional. Ask what further investigation, temporary protection and approvals are needed. Coordinate water or pest diagnosis where relevant. Keep the completed assessment and follow its restrictions before any cutting or loading changes.
Mistakes to avoid
- Identifying bearing walls by appearance alone
- Using a conceptual plate as a construction plan
- Testing a damaged component by pushing or loading it
If it isn’t working
Plans and the house disagree
Treat the present arrangement as unverified and arrange assessment before alteration.
Movement is sudden or worsening
Leave the affected area and obtain urgent help; do not shore or jack it with improvised equipment.
Then & now
Historical context
Buildings use different structural traditions, including masonry and framed construction. Modern assessment considers both the visible arrangement and connections, foundations, alterations and local hazards.
The modern equivalent
A qualified structural assessment with coordinated drawings, verified load paths and approvals for the proposed alteration.
Sources & review
Editorial draft — specialist review pending. Written 2026-10-05. Sources support the stated scope; this page has not been professionally certified.
- National Park Service — Structural Engineering QA Review Checklist ↗
Coordinated bearing-wall locations, complete gravity load paths and professional structural review; used for conceptual literacy only. Checked 2026-10-05.